What you see and hear – Inter-Tel 8690 User Manual
Page 18
4
Inter-Tel
®
Model 8690 Endpoint User Guide
GETT
ING
ST
ARTED
What You See and Hear
The following information describes some of the endpoint features:
•
Using the touch screen: The endpoint has a 640 by 480 pixel LCD touch screen.
Unless you are using a mouse or keyboard, use the stylus to gently tap an area on
the screen to access screen elements. See
to install a mouse or keyboard.
•
Accessing right-click menus: To “right-click” a screen element, press and hold
the stylus on an icon. A ring of black dots appears indicating a right-click, and
the “right-click menu” appears.
•
Waking the endpoint from stand-by: If the endpoint remains idle for more than
four hours (default setting), the back light will time out and the screen will switch
to standby and darken (see
). Lift the handset or tap the screen with the
stylus to wake the endpoint from standby mode. The endpoint also wakes from
standby mode when receiving or placing a call.
•
Using endpoint audio: The endpoint audio overrides the operating system audio.
For example, if you are using an audio player to play music and your endpoint
receives a call, the music is stopped, and the audio output switches to the call.
After the call, the audio is switched back to Media Player. You can configure
audio properties under Start - Settings - Control Panel -
Volume & Sounds
.
•
Recognizing error tones: The following miscues may cause an error tone:
— Using an invalid button combination
— Trying to select a restricted feature
— Dialing a restricted or invalid number
— Dialing too slowly between digits
— Waiting too long before performing the next step
•
Starting over after a time-out: Many features time out if you wait too long
before performing the next step. If this happens, you must start over.