I-Tech Company CMS 6R4 Series - Manual (Page 110)

10-12
CMS-6R4 Series - User’s Guide
/PL Set Plug Parameters
Displays a menu that is used to select options and parameters for Switched
Outlets. Note that all functions provided by the /PL command are also
available via the Web Browser Interface in the "Plug Parameters" menu.
Section 5.5.5 describes the procedure for defining plug parameters.
Availability: Supervisor Only
Format:
/PL [x] [Enter]
Where x is the number or name of the plug to be configured.
Response: The Plug Parameters Menu is displayed.
/S Display Main Status Screen
Displays the Main Status Screen, which summarizes general parameters for
the plugs and ports, lists the connection status for each RS232 Serial Port,
and current On/Off status of each plug. For more information, please refer to
Section 7.1.
Notes:
• When this command is executed by a Non-Supervisor, the Main
Status Screen will only list plugs and ports that are allowed by the
password entered at login.
• When the Main Status Screen is displayed via the Web Browser
Interface, status and parameters for the RS232 Serial Ports will not
be included.
Availability: Supervisor / Non-Supervisor
Format:
/S [Enter]
Response: Displays Main Status Screen.
/SD Display Port Diagnostics
Displays the Port Diagnostics Screen, which provides detailed information
regarding the status of each port. For more information, please refer to
Section 7.3.
Notes: When this command is executed by a Non-Supervisor, the
Port Diagnonstics Screen will only list ports that are allowed by the
password entered at login.
Availability: Supervisor / Non-Supervisor
Format:
/SD [Enter]
Response: Displays Port Diagnostics Screen.