I-Tech Company CMS 6R4 Series - Manual (Page 107)

10-9
Command Reference Guide
/I Reset Network Interface
Resets and reinitializes the CMS-6R4's Network Port.
Note:
This command cannot be issued from the Network Port. The Network
Port cannot reset itself.
Availability: Supervisor Only
Format:
/I [Enter]
Response:
Verbose: "Are You Sure (y/n)?", if Y, initialization begins.
Terse: 5, if Y, initialization begins.
/J Display Site ID
Displays the Site I.D. message.
Availability: Supervisor / Non-Supervisor
Format:
/J [Enter]
Response: Displays Site I.D. Message.
/N Set Network Port Parameters
Displays a menu which is used to select parameters for the Network Port. Also
allows access to the IP Security function, which can restrict network access by
unauthorized IP addresses. Note that all of the functions provided by the /N
command are also available via the Web Browser Interface in the "Network
Parameters" menu. For more information, please refer to Section 5.5.2.
Availability: Supervisor Only
Format:
/N [Enter]
Response: Displays Network Parameters Menu.