I-Tech Company CMS 6R4 Series - Manual (Page 108)

10-10
CMS-6R4 Series - User’s Guide
/OFF Switch Plug(s) Off
Switches selected outlet(s) Off, as described in Section 6.2.2. When a several
plugs are switched Off by this command, Boot/Sequence Delay Period will
be applied as described in Section 5.5.5.1. The /OFF command can also be
entered as /OF.
Note: When this command is executed by a Non-Supervisor, it will
only be applied to the plugs that are allowed by the password entered
at login.
Availability: Supervisor / Non-Supervisor
Format:
/OFF[,Y] [Enter] or /OF[,Y] [Enter]
Where:
,Y (Optional) Suppresses the Command Confirmation Prompt.
n The number or name of the plugs that you intend to switch Off.
To apply the command to several plugs, enter a space character
or plus sign (+) between each plug number. To apply the
command to a range of plugs, enter the numbers for the first
and last plugs in the range, separated by a colon character (:).
To apply the command to all plugs allowed by your password,
enter an asterisk character (*).
Response:
Verbose: The CMS-6R4 will list the plugs that will be switched Off, and
then display the "Sure? (y/n)" prompt, if Y is entered in response to the
prompt, the unit will indicate that the command is in process, and then
display the main status screen when complete.
Terse: 5 if Y, unit will respond with K.
Example: Assuming that your password allows access to Plug 2 and Plug 3,
to switch Plugs 2 and 3 Off, invoke either one of the following command lines:
/OFF,Y 2+3 [Enter] or /OF,Y 2 3 [Enter]