I-Tech Company CMS 6R4 Series - Manual (Page 103)

10-5
Command Reference Guide
/C Connect
Establishes a bidirectional connection between two ports. For more
information, see Section 6.2.3. There are two types of connections:
• Resident Connect: If the /C command specifies only one port, your
resident port will be connected to the specified port.
• Third Party Connect: If the /C command specifies two ports, the unit
will connect the two ports indicated. Third Party Connections can only be
initiated by ports and accounts that permit Supervisor commands.
Notes:
• If your user account does not permit Supervisor commands, you
will only be allowed to connect to ports specifically allowed by that
account.
• Non-Supervisors cannot create Third Party connections; Non-
Supervisors are only allowed to create connections between their
resident port and the ports allowed by their password/account.
• If the user account permits Supervisor commands, you are allowed
to connect to any port.
• RS232 Ports are not allowed to create a Third Party connection to
the Network Port. For example, Port 1 cannot connect Port 3 to the
Network Port.
Availability: Supervisor / Non-Supervisor
Format:
/C [x] [Enter]
Where x is the number or name of the port(s) to be connected.
Response:
Verbose: "Connected x x." When a Resident Connection is initiated, the
CMS-6R4 will also display the Resident Disconnect Sequence.
Terse: 1