Fostex VF-16 - Manual (Page 26)

26
LCD
The follwing describes the contents shown on the LCD and their operations.
Menu shown when turning power ON
When the VF-16 is turned ON with a hard disk already
formatted, the following menu will appear in order:
[Initial... (Initializing)] & [Version] -> [Current Dr] ->
[IDE] -> [Name of Hard disk (Instantly)] ->
[Recording mode (Standard or Quick)].
The head of the program (ABS 0) will then start up at
the time base when the power was turned OFF. The
LCD menu appearing immediately after turning the
power ON is called the “Normal Display”.
The “Normal Display” shows the following items for
the 3 time bases:
* Current Location/Program Number & Program Title
* Scene Number & Scene Name
* Level Meter of Tracks 1-16
* Stereo OUT L/R Master Level/Meter
Normal display
Switching the Time Base
The user can switch between time bases, by pressing
the
[DISP SEL] key, while the [SHIFT] key is depressed.
In this case the time base alternates in the order of “1.
ABS” -> “2. BAR/BEAT/CLK” -> “3. MTC” ->... The
normal display always appears when the time base is
switched. Make use of these displays accordingly.
Time Base: Normal Display in ABS.
Time Base: Normal Display in BAR/BEAT/CLK.
Time Base: Normal Display in MTC.