HP IPAQ H5500 - Manual (Page 141)

User’s Guide 10–14
Using the Fingerprint Reader (h5500 only)
Setting “PIN AND fingerprint” for Logon
In this mode, you are required to enter both a PIN and a
fingerprint to logon.
1. From the Today screen, tap Start > Settings > Password.
2. Select “PIN AND fingerprint” from down arrow list.
3. Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter
the PIN.
4. Tap 4 digits in the PIN field.
5. Tap OK or ENTR.
6. Tap a finger to enroll.
7. Swipe the selected finger, as instructed.
✎
For more information on finger swiping, see the section
“Enrolling a Fingerprint” or tap the Training button.
8. Tap OK.
9. Tap Yes to save changes.
Setting “Password OR fingerprint” for
Logon
In this mode, you are required to enter an alphanumeric password
with at least seven characters or a fingerprint to logon.
✎
The alphanumeric password must contain a combination of upper
and lower case letters, numbers, and punctuation.
1. From the Today screen, tap Start > Settings > Password.
2. Select “Password OR fingerprint” from the down arrow list.