HP IPAQ H5500 User Manual
Page 120
User’s Guide
9–10
Using the Wireless LAN (h5500 only)
Changing TCP/IP Settings
✎
Most Internet Service Providers (ISPs) and private networks now
use dynamically-assigned IP addresses. You will not need to
change TCP/IP settings unless your ISP or private network does
not use dynamically-assigned IP addresses. If you are not sure,
check with your network administrator.
To change TCP/IP Settings:
1. Contact your ISP or network administrator to determine your
IP address, subnet mask, and/or default gateway (if needed).
2. Be sure the WLAN is powered on.
3. Tap the Connections icon > Settings > Advanced tab >
Network Card button > Network Adapters tab.
4. In the My network card connects to... dropdown box, tap
either The Internet or Work.
✎
If you are connecting to your ISP at home, tap The Internet. If
you are connecting to a private network such as a corporate
network at work, you should tap Work.