Corrective action codes, Event information packet (eip) types – HP P6000 User Manual
Page 97
Table 12 HP array software component IDs (continued)
Description
ID
Fault Management
4
Fibre Channel Services
6
Container Services
7
RAID Services
8
Storage System Management Interface
9
System Services
b
Data Replication Manager Component
c
Disk Enclosure Environmental Monitoring Unit Services
d
System Data Center
e
Host Port
42
Metadata Utilities
80
Diagnostic Operations Generator
83
Diagnostic Runtime Services
84
Corrective action codes
You can view the complete list of corrective action codes when you select Corrective action code
in an event description.
Event information packet (EIP) types
Table 13 HP array event information packet (EIP) types
Description
Title
Code
A machine check occurred while a termination event
was being processed.
Fault Manager Termination Processing Recursive
Entry Event
01
An unexpected event occurred while a termination
event was being processed.
Fault Manager Termination Processing Unexpected
02
An event that affects Fault Manager operation
occurred.
Fault Manager Management Event
03
An error was encountered while accessing a physical
disk drive.
Fibre Channel Services Physical Disk Drive Error
04
The state of a Storage System Management Interface
entity was changed.
Storage System Management Interface Entity State
Change
05
Excessive link errors were detected on a Fibre
Channel port.
Fibre Channel Services Fibre Channel Port Link Error
07
A Fibre Channel port link has failed or a Drive
Enclosure Environmental Monitoring Unit task has
failed.
Fibre Channel Services Fibre Channel Port Link
08
An error was encountered while attempting to access
a physical disk drive or the mirror port.
Fibre Channel Services Physical Disk Drive/Mirror
Port Error
09
A Storage System state change occurred.
Storage System State Services State Change
0A
A physical disk drive state change occurred.
Storage System State Services Physical Disk Drive
State Change
0B
A Data Replication Manager state change occurred.
Data Replication Manager State Change
0C
Event code types and descriptions
97