Data migration licenses, Fcip licenses, Model upgrade licensing – HP P6000 User Manual
Page 22
Data migration licenses
HP P6000 Command View and the MPX200 iSCSI controller support the Data Migration licenses.
Figure 5 Initalized Storage System Properties window
FCIP licenses
The MPX200 iSCSI controller supports FCIP licenses.
Model upgrade licensing
Only data-in-place upgrades are supported. Model upgrade is supported as shown
.
Table 1 Model upgrade support
To:
You can upgrade from:
EVA4100, EVA6100, or EVA8100
EVA3000
EVA4100, EVA6100, or EVA8100
EVA4000
EVA4100, EVA6100, or EVA8100
EVA5000
EVA6100 or EVA8100
EVA6000
EVA8100
EVA8000
EVA4400 (HSV300-S), EVA6400, or EVA8400
EVA4400 (HSV300)
EVA4400 (HSV300), EVA6400, or EVA8400
EVA4400 (HSV300-S)
P6300 (FC-iSCSI), P6300 (iSCSI/FCoE), P6500 (FC, FC-iSCSI, or iSCSI/FCoE)
P6300 (FC)
P6500 (FC-iSCSI) or P6500 (iSCSI/FCoE)
P6500 (FC)
Upgrading an array model requires a Model Upgrade license. Model Upgrade licenses are effective
only if there is a base permanent license for the lower version of controller. During installation, the
base permanent license is validated and if one is not found, a warning message displays to inform
you that the upgrade license is not in effect because there is no permanent unlimited license.
22
Licensing HP P6000/EVA storage systems