beautypg.com

Disk group capacity, Number of physical disks in a group, Disk group occupancy and occupancy alarm level – HP P6000 User Manual

Page 28

background image

Number of physical disks in a group

With online and near-online disk types, the minimum number of physical disks is 8.

With the solid state drive disk type, the minimum number of physical disks is 6.

If the number of disks is not specified when creating a disk group, the minimum is assigned.
If the minimum number of disks is not available, the disk group cannot be created.

There is no maximum number of physical disks.

Disk group occupancy and occupancy alarm level

The term occupancy refers to the amount of disk space being used for user data in a disk group.

There are two occupancy alarm levels:

The warning level is the point (percent of capacity) at which the array issues a disk group
allocation warning message. The default warning alarm level is 70% of capacity.

The critical alarm level is the point (percent of capacity) at which the array issues a disk group
allocation critical message. The default critical alarm level is 90% of capacity.

For example, if a disk group's capacity is 200 GB, and the default alarm levels are set, a warning
is issued when the total capacity of the virtual disks in the disk group reaches 140 GB, and a
critical message is issued when the total capacity of the virtual disks in the disk group reaches 180
GB.

If you change the occupancy alarm default values, the critical alarm level must be greater than the
warning alarm level.

NOTE:

HP P6000 Command View 9.x and earlier have a warning alarm level only. The default

value is 90%.

Disk group capacity

Disk group capacity (in GB) is presented differently for different versions of HP XCS controller
software.

XCS 6.xxx, and XCS 09xxxxxx

The maximum virtual disk size shown cannot exceed 2 TB, regardless of the total capacity.

Total. Shows the formatted physical disk drive capacity of the disk group.

Maximum Vdisk Size, Vraid0. Shows the largest virtual disk that could be created in the disk
group, using Vraid0.

Maximum Vdisk Size, Vraid1. Shows the largest virtual disk that could be created in the disk
group, using Vraid1.

Maximum Vdisk Size, Vraid5. Shows the largest virtual disk that could be created in the disk
group, using Vraid5.

HP XCS 095xxxxx or later

The estimated capacity is based on factors, such as the estimated number and size of virtual disks
that you might typically create. The actual total capacity can be more or less than the estimates.
The maximum virtual disk size cannot exceed 32 TB, regardless of the total capacity.

Total. Shows the formatted physical disk drive capacity of the disk group.

Available, Vraid0. Shows the estimated capacity, if the entire disk group was used for Vraid0
virtual disks.

Available, Vraid1. Shows the estimated capacity, if the entire disk group was used for Vraid1
virtual disks.

28

Provisioning storage