HP t5520 - Manual (Page 43)

Administrator’s Guide www.hp.com 4-9
Control Panel
✎
If you set the display settings out of range, you must reset the terminal
to factory defaults by rebooting the terminal and holding down the
F9
key until you see a window that says “Loading...” at the bottom.
Resetting the terminal to factory defaults erases all configuration
settings and connections.
Screen Settings
Resolution/Color 60Hz 70Hz 72Hz 75Hz 85Hz
640x480x8 X X X X X
640x480x16 X X X X X
640x480x32 X X X X X
800x600x8 X X X X X
800x600x16 X X X X X
800x600x32 X X X X X
1024x768x8 X X X X X
1024x768x16 X X X X X
1024x768x32 X X X X X
*1152x864x16 X X X X
*1152x864x32 X X X
1280x1024x8 X X X X X
1280x1024x16 X X X X X
1280x1024x32 X
*1600x1200x8 X X X X
*1600x1200x16 X X X X
*These resolutions are not supported on all thin client models.
*All refresh rates are not supported by all monitors.