HP t5520 - Manual (Page 28)

3-14 www.hp.com Administrator’s Guide
HP Connection Administrator
2. On the Assign Connections tab, select the appropriate user from
the User list.
3. Select the connection from the user’s connection list that you
want to make primary.
4. In the Primary column, click on the column value to change it.
Yes means the connection is a primary connection. The first entry
in the list must be primary.
5. If you want to assign a secondary connection, select the
connection and change the value in the Primary column to No.
The connection becomes secondary to the first primary
connection directly above it in the list.
6. To arrange the order of connections, select a connection and click
the up and down arrows. Secondary connections are associated
with the first primary connection above them in the list.
7. Click Apply.
✎
Every secondary connection must have a primary connection listed
above it.
Enabling automatic connection and reconnection
In the Advanced window, you can set up primary connections
assigned to users to automatically connect at boot up and to reconnect
if disconnected. Automatic connection requires that you configure the
Connection Adminstrator to start automatically. For more
information, see
“Auto starting Connection Administrator”.
To enable automatic connection and reconnection:
1. In the HP Connection Administrator window, click Advanced.
2. On the Assign Connections tab, select the appropriate user from
the User list.