HP t5520 - Manual (Page 34)

3-20 www.hp.com Administrator’s Guide
HP Connection Administrator
5. If you want to activate the single button connect feature, select
Single Button Log On. This feature invokes a dialog box that
requires the terminal operator to press Enter or click the Logon
button on the dialog box to log in. If someone other than the auto
logon user wants to log onto the terminal, press
Esc or Alt-F4
.
6. From the Account list, select the account that the system will use
to log on the terminal operator.
7. Select Enable Reset Hotkey to allow the terminal to be reset to
factory defaults (registry and shortcuts) by pressing and holding
F9
key during boot.
CAUTION: If you disable the F9 reset function and then change
monitors or change display settings resulting in your monitor
becoming unable to display, the only way to recover the client
will be to reflash it.
8. Click OK at the top of the window to save your changes.
Switching to a different user
To switch to a different user when booting:
1. Press the power button to start the system.
2. Press
Esc
or
Alt-F4
before the automatic logon countdown
completes.
3. Log on as the user of your choice.