To insert a new identifier – Honeywell GNS-XL User Manual
Page 337
7-71
GNS-X
L
Flight Management System AFIS Operation
Rev. 3
Oct/02
9. ENT Key - DEPRESS. Identifiers listed on this page will be trans-
mitted to the ground via the data link.
NOTE: Wait for DATA CENTER AK if sending multiple requests.
TO UPDATE THE WINDS ALOFT DATA PAGES
10. Access the WINDS ALOFT Data Pages (Figure 7-139) by select-
ing an identifier on the WINDS ALOFT menu Page.
TO INSERT A NEW IDENTIFIER
11. Line Select Key - DEPRESS
to position the cursor over
the identifier field.
12. IDENTIFIER - INSERT.
The data text fields will go
blank.
13. ENT Key - DEPRESS. The
WINDS ALOFT Menu Page
appears with the new identi-
fier in place of the original
identifier, and the cursor positioned at the location of the original
identifier selected. If there is no data available for the new identi-
fier, it will appear in parentheses.
ICT
122356Z
18000 310/23-17
24000 290/34-31
30000 290/44-47
34000 300/53-54
39000 310/68-56
45000 310/57-59
WINDS ALOFT
Figure 7-139