Returning to auto – Honeywell GNS-XL User Manual
Page 331
7-65
GNS-X
L
Flight Management System AFIS Operation
Rev. 3
Oct/02
RETURNING TO AUTO
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line
Select
Key
-
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
122)
3. ENT Key - DEPRESS.
4. Line
Select
Key
-
DEPRESS to position cur-
sor over MAN or OFF
option of ground network
field. (Figure 7-123)
5. BACK Key - DEPRESS
until AUTO appears in the
cursor. (Figure 7-124)
6. ENT Key - DEPRESS to
select AUTO mode.
NOTE:
AUTO REPORT,
AUTO WX UPDT, and OPER-
ATING MODE selection status
are stored in non-volatile memo-
ry. If the operator turns to OFF
or MAN, the operator must res-
elect to turn ON.
The ACTIVE LINK information
at the bottom of the page indi-
cates the network that is being
serviced at that time. If the
system is operating in automatic
mode and the network selected
by the present position informa-
tion is turned OFF or none are
operational, NONE will be dis-
played.
AFIS OPERATING MODES
>
>
>
AUTO REPORT
ON
AUTO WX UPDT
ON
ARINC
OFF
SITA/AVICOM
OFF
PRINTER CTRL
ACTIVE LINK:
NONE
Figure 7-123
AFIS MENU
<
<
<
<
1
AFIS FLT PLAN
2
SIGMETS
3
TERMINAL WX
4
WINDS ALOFT
5
RECALL AFIS FPL
6
SEND AFIS MSG
7
DISPL AFIS MSG
8
OPERATING MODES
Figure 7-122
AFIS OPERATING MODES
>
>
>
AUTO REPORT
ON
AUTO WX UPDT
ON
ARINC
AUTO
SITA/AVICOM
OFF
PRINTER CTRL
ACTIVE LINK:
ARINC
Figure 7-124