Selecting update as active flight plan – Honeywell GNS-XL User Manual

Page 333

7-67

GNS-X

Flight Management System AFIS Operation

Rev. 3
Oct/02

13. CRUISE MODE - VERIFY or

INSERT an amended cruise
mode.

14. ENT Key - DEPRESS. The

cursor

positions

over

TRANSMIT REQUEST?
field. (Figure 7-127)

15. ENT Key - DEPRESS to initi-

ate a Flight Plan Update.
ACTIVE FPL Page will
appear.

NOTE: For aircraft equipped with the Antenna Switching Unit, if DATA
LINK DISABLED message appears DEPRESS momentary AFIS
annunciator to enable the air to ground data link. Also enable VHF or
satellite network.

Wait for DATA CENT AK message if sending multiple requests.

SELECTING UPDATE AS
ACTIVE FLIGHT PLAN

1. FPL Key - DEPRESS until

AFIS FLIGHT PLAN LIST
Page appears with Updated
Flight Plan (UPDA - XXXX).
(Figure 7-128)

2. Line Select Key - DEPRESS

to position cursor over
Updated Flight Plan.

3. ENT Key - DEPRESS.

Cursor positions itself over
REPLACE ACTIVE FPL?

4. ENT Key - DEPRESS to

replace Active Flight Plan
with Updated Flight Plan.
(Figure 7-129)

5. ACTIVE FPL - CONFIRM.

Updated

Flight

Plan

becomes the Active Flight
Plan.

ACTUAL FL

410

ASSIGNED FL

370

PAYLOAD

1200

FUEL REM11985

CRUISE MODE

M80

TRANSMIT REQUEST?

AFIS FPL UPDATE

Figure 7-127

FLIGHT PLAN LIST 1/4

CYUL-KJFK

06APR9O

UPDA-KORD

16APR90

REPLACE ACTIVE FPL?

AFIS

Figure 7-128