Auto reporting, Turning auto report off – Honeywell GNS-XL User Manual
Page 326
7-60
GNS-X
L
Flight Management System AFIS Operation
Rev. 3
Oct/02
SELECTING OPERATING MODES (FOR AFIS USERS NOT
EQUIPPED WITH SATELLITE DATA COMMUNICATIONS
SYSTEM)
AUTO REPORTING
When the system is initialized,
the Automatic Reporting and or
Auto Wx update function will
retain the status at aircraft shut-
down. The following proce-
dures allow the function to be
turned OFF and back ON.
TURNING AUTO REPORT
OFF
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line
Select
Key
-
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
107)
3. ENT Key - DEPRESS.
4. Line
Select
Key
-
DEPRESS to position cur-
sor over ON option of
AUTO REPORT field.
(Figure 7-108)
5. BACK Key - DEPRESS.
OFF appears in the cursor.
(Figure 7-109)
6. ENT Key - DEPRESS to
turn OFF
the AUTO
REPORT function.
NOTE: If all ground networks
are OFF, then AUTO REPORT
will be OFF.
AFIS MENU
<
<
<
<
1
AFIS FLT PLAN
2
SIGMETS
3
TERMINAL WX
4
WINDS ALOFT
5
RECALL AFIS FPL
6
SEND AFIS MSG
7
DISPL AFIS MSG
8
OPERATING MODES
Figure 7-107
AFIS OPERATING MODES
>
>
>
AUTO REPORT
ON
AUTO WX UPDT
ON
ARINC
AUTO
SITA/AVICOM
OFF
PRINTER CTRL
ACTIVE LINK:
ARINC
Figure 7-108
AFIS OPERATING MODES
>
>
>
AUTO REPORT
OFF
AUTO WX UPDT
ON
ARINC
AUTO
SITA/AVICOM
OFF
PRINTER CTRL
ACTIVE LINK:
ARINC
Figure 7-109