Vlf/omega station deselection, System operation 3-120 – Honeywell GNS-XL User Manual
Page 238

System Operation
3-120
GNS-X
L
Flight Management System
Rev. 0
Oct/96
VLF/OMEGA STATION DESELECTION
The following procedure allows a VLF Communication or Omega sta-
tion to be removed from an RPU’s navigation solution.
NOTE: This procedure should be used with caution since stations are
automatically deselected by the computer if unsuitable for navigation.
1.
NAV Key - DEPRESS to
display NAVIGATION
Page 4.
2.
Line Select Key -
DEPRESS to position
the cursor over VLF sen-
sor field. (Figure 3-190)
3.
ENT Key - DEPRESS.
4.
NAV or NXT Key -
DEPRESS to sequence
through VLF SUBSEC-
TION. Select either VLF
Comm or Omega Station
List Page. (Figure 3-191)
5.
Line Select Key -
DEPRESS to position
cursor over station iden-
tifier to be deselected.
(Figure 3-191)
6.
BACK Key - DEPRESS.
(Figure 3-192) DESE-
LECT? will appear to
inform the pilot of the
pending change.
7.
ENT Key - DEPRESS to
DESELECT station.
To restore a deselected
station:
a. Line Select Key -
DEPRESS to position
the cursor over the sta-
tion identifier to be
restored.
WSH
99
+
AUS
--
TOO FAR
ANT
--
-
MNE
99
+
HAW
73
DESELECT?
JPN
76
SPARE
PTR‘
35
+
ANN
99
+
VLF
SUBSECTION
3/4
<
<
<
<
Figure 3-192
IDENT ------
POS
N 33 43.33
W116 54.37
VLF ?
0.1
VPU
0.0
IRS
0.2
GPS
0.1
NAVIGATION 4/4
<
>
>
>
>
Figure 3-190
WSH
99
+
AUS
--
TOO FAR
ANT
--
-
MNE
99
+
HAW
73
UNSTABLE
JPN
76
SPARE
PTR‘
35
+
ANN
99
+
VLF
SUBSECTION
3/4
<
<
<
<
Figure 3-191