Heat & Glo Fireplace 8000CL-IPI-S - Manual (Page 55)

55
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12
DOOR
FINISHING
MATERIAL
FINISHING
MATERIAL
C
(Includes 1/8 in. opening each side of door)
A
(Outside door width)
Finishing material thickness, 1-4 inches maximum
B = Top of door to bottom of fireplace.
D = Bottom of Finishing Material to Bottom of Fireplace
A
(Outside door width)
B
C
(Includes 1/8 in. opening each side of door)
D
FINISHING
STRIPS USED
NON-COMBUSTIBLE
FINISHING MATERIAL
Figure 13.6 Folio/CF Inside Fit
FINISHING STRIP NOT USED
(See Figure 13.7 for
removal instructions)
NON-COMBUSTIBLE
FINISHING MATERIAL
Figure 13.5 Finishing Material Thickness Greater Than One Inch
DOOR
FINISHING MATERIAL FINISHING MATERIAL
8000 Models 6000 Models
Inches Millimeters Inches Millimeters
A 44-1/16 1119 37-1/16 941
B 35-15/16 913 34-1/16 865
C 44-5/16 1126 37-5/16 948
D 36-5/16 922 34-7/16 882
Finishing Material Thickness:
1-4 inches maximum
NOTICE: Remove finishing strips before firing appliance. NOTICE: Remove finishing strips before firing appliance.
Finishing Material Thickness:
0-4 inches maximum