HP md5020n - Manual (Page 56)

Adjusting the TV 56
Setup Menu
Setting Description
Language Selects the language used by the on-screen menu.
Channel setup Configures channels for the antenna or cable input.
Cable system Sets the frequency standard used by the TV’s cable input. If your cable provider uses the HRC
or IRC standard, select that option.
Auto search cable Scans all cable channels for valid channels and updates the cable channel guide.
Add/Remove cable Selects cable channels to show or hide in the cable channel guide.
Auto search
antenna
Scans all antenna channels for valid channels and updates the antenna channel guide.
Add/Remove
antenna
Selects antenna channels to show or hide in the antenna channel guide.
Cable card Displays information for CableCARD setup.
Time Sets up the clock.
Clock Sets whether the clock is automatically set using data from the antenna and cable inputs.
Time zone Sets the time zone.
Daylight savings Sets how daylight savings is configured.
Date Sets the calendar date.
Time Sets the clock time.
Sleep Sets or shows how long the TV will stay on before automatically turning off. When activated,
this function operates only one time.
Source names Sets labels for input sources.
Closed Caption Configures TV closed captions for the antenna and cable inputs.
CC mode Sets whether closed captions are shown. On mute displays captions only while sound is
muted.
Standard CC Selects a caption option for standard channels.
DTV CC Selects a caption option for digital channels.
DTV CC mode Selects a configuration for digital captions.
Customize DTV CC Adjusts the configuration for captions on digital channels. If you change any settings, DTV CC
mode automatically changes to Custom.
Menu timeout Sets how many seconds the on-screen menu waits for input before it closes.
Factory reset Restores all menu settings to factory default settings.
About Displays information and status for the TV.