HP md5020n - Manual (Page 40)

Using the Remote Control 40
Controlling Other Devices
After you program the remote control for another device, you can control that device using these basic
functions.
1.
Press Device to select the indicator for the device you want to operate. You cannot select an indicator
that is not programmed.
2. Press buttons on the remote control to operate the device. See the following tables.
NOTE: The following lists show basic functions. Some devices might support other functions not listed
below. Other devices might not support all functions.
All devices
To do this... Press...
Control the device Device one or more times
Turn device on and off
Change device settings (using device menu)
Settings, then , , , , and OK
Display information Info
DVD player
To do this... Press...
Play *
Pause *
Stop *
Jump to next scene (chapter) *
Jump to previous scene (chapter) *
Fast forward *
Fast backward *
Select from DVD menu Menu, then , , , , and OK
* While DVD or TV is selected
Set-top cable box
To do this... Press...
Change channel Ch+ or Ch–
Go to channel 0 through 9, then Enter
Previous channel Last
Display channel guide Guide
Satellite receiver
To do this... Press...
Change channel Ch+ or Ch–
Go to channel 0 through 9, then Enter
Previous channel Last
Display satellite guide Guide