HP md5020n - Manual (Page 45)

Watching a Show 45
Watching Two Pictures
S Press the green/PIP button on the remote control one or more times to cycle through these options:
•
Overlapping pictures (PIP)
• Side-by-side pictures (POP)
• No second picture
When two pictures are shown, you can control their configuration. The “active picture” is the one with sound
and that sometimes has a border.
NOTE: One of the pictures must be the antenna or cable source. However, you cannot view the antenna
and cable sources at the same time.
Turning Off after a Delay
You can set the TV to play for up to two hours and then automatically turn off.
•
To set the sleep timer, press the blue/SLEEP button one or more times to select the delay, and then
press OK.
• To view the timer, press the blue/SLEEP button once.
To do this... Press...
Find the active picture or when no border is visible
Change the size of the active picture or
Move the border to the other picture and play its sound or
Swap picture positions OK
Move an overlapping picture (PIP) Settings, then go to Source > Dual picture > Layout
Show a different source Source
Show only the active picture (end two pictures) Green/PIP