Humax HDCI-2000 - Manual (Page 75)

11. Software Update
In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the
Humax website to check the latest news and newly released software versions.
**
http://www.humaxdigital.com.
**
It is recommended that you periodically check for the availability of software update.
11.1 OTA (Over the Air)
OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software for equipment through a broadcast
system. OTA is simply an alternative method for downloading software versions. However, the manufacturers reserve
the right for deciding the release of the software for their products by beaming the latest software versions over the air
via satellite. Note that OTA is only limited to certain geographical regions mainly due to different antennas having
different footprints(area where the signal can be received). The software update via satellite system will only occur
under the following circumstances.
1. The equipment should have appropriate loader software.
Caution Please note that if normal loader software is not equipped, the product may not be updated or
operate properly after software update.
**
2. The manufacturer decides to release the software via a designated antenna system.
3. The equipment must be tuned properly to the same antenna equivalent to that of the manufacturer.
4. Update software when the signal strength quality is high. If the weather is not favorable and the signal strength
quality is not recommendable, perform the software update later.
Caution:
• Please be careful to keep the power on and the power cord plugged in during software update. If the power
is off during software update, fatal damage may be caused to the product.
• Please be careful not to pull out the signal line (LNB cable) during software update. Update may be
interrupted and the product may not operate.
Note:
• The predefined channel list may return to default setting after OTA has been performed.
• Other functions will not activate while software update takes place.
• It may take 5 ~10 minutes to update software.
• Scheduling operation cannot work during software update.
11. Software Update
GB 74