Humax HDCI-2000 - Manual (Page 51)

3. Enter a channel name directly using the keyboard displayed on
the screen.
4. When entering channel name is complete, select Save and press
the OK button.
**
Note: For detailed information on using the keyboard, refer to 5.1.2
Renaming Channels.
2. Locking/Unlocking Channels
1. Select the channel you want to lock and press the RED
button on the remote control. You can select more than one
channel.
2. Select Lock using the button and press the OK button.
**
Note:
• When all selected channels are locked, Lock is switched into
Unlock. When you press Unlock, the locked channel is switched
into an unlocked channel.
• To watch locked channels, you must enter the password using
the NUMERIC(0-9) buttons.
• The default password is 0000.
3. Moving Channels
1. Select the channel you want to move and press the RED
button on the remote control. You can select more than one
channel.
2. Select Move using the button, and press the OK
button. The selected channel disappears from the channel list
temporarily.
3. Move the cursor to the destination in the channel list using the
button, and press the OK button.
4. The selected channel(s) is moved to the selected location in the
given order.
**
Note:
• Move is available only for TV or radio channel lists.
• The channel number is changed by using Move function.
9. Edit Channels
GB 50