Humax HDCI-2000 - Manual (Page 60)

Edit Satellite Data
You can set the position of the satellite, which the motor antenna heads for, and decide whether or not to use the
satellite.
1. Select Edit Satellite Data from Motor Antenna Setting using
the button and press the OK button.
2. Enter the appropriate value for Satellite, Activate Satellite and
Satellite Longitude.
**
• Satellite
1. Select Satellite using the button.
2. Select a satellite to edit using the OK or button.
**
• Activate Satellite
1. Select Activate Satellite using the button and press the OK button.
2. Select Enable/Disable using the OK or button.
Enable Channel search is available.
Disable Current channel does not exist. Channel search unavailable.
**
• Satellite Longitude
1. Select Satellite Longitude using the button.
2. Enter satellite longitude value using the NUMERIC(0-9) buttons.
3. Set East/West using the OK or button.
4. Press the OK button to complete.
Note: Satellite Longitude is editable for User Define Satellite only.
GB 59