Humax HDCI-2000 - Manual (Page 49)

8.5 Other Settings
You can configure other settings.
1. Press the MENU button.
2. Select Setting using the button and press the OK
button.
3. Select Other Settings using the button and press the OK
button.
1. i Display Time
You can set the automatic display time of the information box when the channel is switched.
1. Select i Display Time using the button.
2. Select a value between Disable , 1~ 20 seconds using the OK
or button.
**
Note: When set to Disable, the i-plate will not be displayed when you
switch the channel.
2. OSD Transparency
You can set the transparency of On Screen Display.
1. Select OSD Transparency using the button.
2. Select one option among Disable, 25, 50 and 75 using the OK or button.
Disable Fully opaque screen
25, 50, 75 The bigger the number, the more transparent the screen.
8. Setting
GB 48