Humax HDCI-2000 - Manual (Page 20)

3. Installation Wizard
When powering on your product for the first time after purchase, the installation wizard will operate automatically. This
chapter includes the first time setup of the language, time, search channel and software update which will show you how
to start the initial installation.
**
Note:
• The default password is 0000.
• If you have forgotten your password, please contact your local product distributor.
3.1 Language
Language allows you to select the main language.
Select the appropriate language from the list using the OK or
button. Select Next and press the OK button to save the selected
language as default language.
**
Note: The display language may differ according to country.
3.2 Search Channel
Search Channel enables you to enter the values such as Satellite, LNB Frequency, 22kHz Tone and DiSEqC Input
of each item and start channel search.
1. Satellite:
Select the required satellite using the OK or button and
press the OK button.
2. LNB Frequency:
Select the required LNB frequency using the OK or
button and press the OK button.
3. 22kHz Tone:
Select Enable/Disable using the OK or button and
press the OK button.
4. DiSEqC Input:
Select the required DiSEqC input using the OK or
button and press the OK button.
5. Select Next and press the OK button to proceed.
3. Installation Wizard
GB 19