Humax HDCI-2000 - Manual (Page 59)

**
• Motor Type
1. Select Motor Type using the button.
2. Select one option from DiSEqC1.2 and USALS using the OK or button.
DiSEqC1.2 General motor antenna using DiSEqC1.2
USALS Motor antenna using USALS
Note: When Motor Type is set as DiSEqC 1.2, both My Longitude and My Latitude are set to Disabled.
**
• My Longitude
1. Select My Longitude using the button.
2. Enter my longitude value using the NUMERIC(0-9) buttons.
3. Select from East/West using the OK or button.
4. Press the OK button to complete.
**
• My Latitude
1. Select My Latitude using the button.
2. Enter my latitude value using the NUMERIC(0-9) buttons.
3. Select from North/South using the OK or button.
4. Press the OK button to complete.
10. Installation
GB 58