Humax HDCI-2000 - Manual (Page 42)

7.5 Startup-Channel
You can assign a certain channel to be displayed when the product is turned on.
1. Press the MENU button.
2. Select System using the button and press the OK
button.
3. Select Startup-Channel using the button and press the
OK button.
1. Setting the Startup-Channel
You can choose to assign a certain channel to be displayed when powering on.
1. Setting the Startup-Channel using the button.
2. Select one option from On/Off using the OK or button.
On The assigned channel will be displayed when powering on.
Off The last channel you have watched will be displayed when powering on.
2. Startup-Channel
You can assign a preferred channel as the start channel.
1. Select Startup-Channel using the button.
2. Select one option from 100 or User preference using the OK
or button.
3. When you have selected User preference, enter the channel
number using the NUMERIC(0-9) buttons and press the OK
button.
**
Note: When Off is selected, Start Channel Number is inactivated.
You can switch to TV/radio by pressing the TV/RADIO
button on the remote control.
GB 41