Humax HDCI-2000 - Manual (Page 74)

10.5 Default Setting
Default Setting enables you to restore the product to the factory default.
**
Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel
list, and all user configured data will be deleted.
1. Press the MENU button.
2. Select Installation using the button, and press the OK
button.
3. Select Default Setting using the button and press the OK
button.
4. Select Yes and press the OK button to restore all setting to
factory default. To return to the previous menu, select No and
press the OK
or BACK button.
5. You will be prompted to enter your password again before
starting to load default setting. Enter the password to proceed.
6. When default setting is completed, installation wizard pops up
automatically and assists channel search. For detailed
information about installation wizard, refer to Chapter 3.
**
Note: The default password is 0000.
**
**
GB 73