Humax HDCI-2000 - Manual (Page 22)

**
3.3 Time
You can set the current time.
Select GMT Offset and press the OK or button to display the
values for GMT offset.
Select the appropriate GMT offset value using the button and
press the OK button to set the current time. Then select Next and
press the OK button.
**
Note: If GMT offset is Auto, it is automatically set depending on your
country. However, if the time is not set properly, you can
change GMT offset to fit your local time.
3.4 Software Update
Software Update displays the software version and lets you choose to update the new software.
When new software is detected, you can choose to download the
software immediately or save for later. You can refuse software update
if not needed. In case there is no software currently available, select
Next and press the OK
button to proceed to the next step.
**
Note:
• When there is no new software to update, a pop-up will appear.
• For more information about software update, refer to 11.
Software Update.
**
After all setting is complete, you can view the result screen. Select Finish and press the OK button to complete the
installation wizard.
GB 21