Humax HDCI-2000 - Manual (Page 56)

10. Installation
In this chapter you can configure installation settings such as search channels, advanced search, SMATV search,
software update and default setting.
**
Note: Press the BACK button to save the changes and return to the previous menu. Press the MENU
button to exit the menu screen.
10.1 Search Channels
Search Channels enables you to configure the installation settings.
1. Press the MENU button.
2. Select Installation using the button, and press the OK
button.
3. Select Search Channels using the button and press the
OK button.
1. Fixed Antenna
You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search
cannot be activated which means you cannot watch any of the programmes on air.
1. Select Antenna and press the OK button to view the list of
antennas.
2. Select a value for Antenna using the OK or button.
3. Enter the value for Satellite, LNB Frequency, 22kHz Tone,
DiSEqC Input and LNB Voltage.
4. Select Save and press the OK button to complete.
10. Installation
GB 55