HP h6300 - Manual (Page 95)

Making Your Connections
User’s Guide 5–5
hp CONFIDENTIAL DRAFT
hp CONFIDENTIAL
November 26, 2003 11:47 am
DRAFT
Configuring your GPRS connection on
your Pocket PC
1. From the Start menu, tap Settings > Connections tab >
Connections icon.
2. Select Add a new modem connection from either the ISP
section or My Work Network section.
3. Enter a descriptive name for the connection (for example,
Phone Dialup or anything you want).
4. In the Select a modem list, tap Cellular Line (GPRS).
5. Tap Next.
6. Under Access Point Name, enter the APN provided by your
GPRS service provider.
7. Tap Next.
8. Enter your User name, Password and, if provided by your ISP
or network administrator, your Domain name.
You should not need to change any settings in Advanced.
Most ISPs now use a dynamically assigned address. If your
GPRS service provider specified the IP addresses for your
DNS servers, tap Advanced, then tap the Name Servers tab.
Select Use specific server addresses, and then enter the
DNS addresses provided by your GPRS service provider. Tap
OK.
9. Tap Finish.
Connecting to the GPRS Network
1. From the Start menu, tap Settings > System tab > GPRS.
2. To automatically connect and/or disconnect from the
network, select the appropriate options under GPRS
Settings.
Your service provider can provide additional information on
connecting to the Internet using GPRS.