Removing the battery – HP h6300 User Manual

Page 123

Text mode
Original mode

Managing the Battery

User’s Guide

10–3

November 26, 2003 11:47 am

NOTE: If the battery is not fully charged, you must connect the
AC Adapter to the Pocket PC to fully charge it before continuing.
It takes up to four hours to fully charge a completely drained
battery.

Removing the Battery

NOTE:

Before removing the battery, use ActiveSync to back up

data on your Pocket PC. If you need to clear the memory during
the removal process, you will be able to restore the data.

To remove the battery from the iPAQ Pocket PC h6300 Series:

1. Insert the stylus into the battery lock 1 and slide it to the

right or unlocked position.

2. Slide the battery latch down 2 to release the battery.

3. Remove the battery 3.