Honeywell UMC800 User Manual
Page 86
Maintenance
Replacement Procedures
78
UMC800 Controller Installation and User Guide
Release F
4/01
Step
Action
18
Reconnect power wiring to proper terminals on power supply as shown.
Hot
Neutral
Ground
F 3,15 AT
250V
L1
L2 / N
19
Replace front cover and secure with two screws.
20
Restore power to controller.
21
Verify configuration.
Perform calibration of AI modules and CJC references (if using T/C) for all channels if greater
than 0.1 % accuracy is required.