HP DL185 - Manual (Page 35)

Contents 35
Figure 8 Removing the Optical Drive Carrier
To remove the bezel blank from the optical drive carrier:
1. Press in the four tabs (two on the top and two on the bottom) to release the bezel blank from the
carrier.
2. Pull the bezel blank out of the carrier.
CAUTION: Do not discard the bezel blank. If the optical drive is removed in the future, you must
reinstall the bezel blank to maintain proper system function.
Figure 9 Removing the Bezel Blank
To install the optical carrier with optical drive:
1. Align the optical drive in the carrier and install drive.
2. Secure the optical drive to the carrier with the two mounting screws.