HP VXI E1432A - Manual (Page 27)

The buttons on the right side of the SFP display are defined as follows:
Meas
This button opens the Measurement Control dialog box. You can set:
q Measurement single/repeat
q Mode block/continuous
q Trigger auto/manual/input
q Frequency span
q Blocksize
Input
This button opens a dialog box in which you can set up the HP E1432A’s
inputs. You can set:
q Channel number
q Range
q AC or DC coupling
q Grounding method
q Digital anti-alias filter
q Analog anti-alias filter
q Trigger on/off
q Trigger mode level/bound
q Trigger level
q Hysteresis
q Trigger Slope
There is a checkbox to make all channels identical.
Source
This opens a dialog box for controlling the source output of the HP
E1432A’s source. This is only available for HP E1432A’s that have the
Arbitrary Source Option 1D4. You can set:
q Channel number
q Active on/off
q Mode sine/burst sine/random/burst random
q Ramp rate
q Sine frequency
q Sine phase
q Output normal/grounded/open/cal/multi
q Cola (Constant Output Level Amplifier) off/on
q Duty Cycle
q Sum off/on
q Seed
q Range
HP E1432A User's Guide
Getting Started With the HP E1432A
2-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com