HP VXI E1432A User Manual
Page 199

Performance Benchmarks
Because these performance benchmarks depend on the
software and hardware configuration, they are included
as supplemental, non-warranted characteristics.
VXI Data Transfer Rate (P1 connector)
From HP E1432A DRAM to VXI V743 Controller
6.5 MB/s
From HP E1432A DRAM to MXI to external
HP Series 700 Controller
1.5 MB/s
From HP E1432A DRAM to VXLink interface
345 kB/s
From HP E1432A DRAM to E6233A Pentium Controller 1.6 MB/s
From HP E1432A DRAM to National MXI-2 to external
200 MHz Pentium Pro
1.2 MB/s
Local Bus Data Transfer Rate
From HP E1432A DRAM, one block, during continuous
acquisition
From HP E1432As DRAM to HP E1562D
From HP E1432As DRAM to HP E1562E
15.7 M Bytes/s
5 MB/s to 7.8 MB/s
10 MB/s to 15.7 MB/s
Maximum number of input channels for continuous
throughput at 51.2 kHz sample rate
144 Channels
FIFO Memory
(Maximum FIFO size, 4M Bytes DRAM installed)
(Maximum FIFO size, 32 MB DRAM installed)
2 MSa/number active channels (standard)
16 MSa/number active channels (opt. ANC)
Specification Note
Specifications describe warranted
performance over the temperature
range of 0° to 50°C, after a
15-minute warm-up from ambient
conditions. Supplemental
characteristics identified as
“typical”, provide useful
information by giving
non-warranted performance
parameters. Typical performance
is applicable from 20° to 30°C.
Abbreviations
Fs = sample rate of ADC.
Fc = cut off frequency of high pass
or low pass filters.
dBfs = dB relative to full scale
amplitude range.
dBc = dB relative to carrier
amplitude.
Typical = typical, non-warranted,
performance specification included
to provide general product
information.
Warranty Information
The HP E1433A comes with a 3-yr
warranty. During that period, the
unit will either be replaced or
repaired, at HP’s option, and
returned to the customer without
charge. There is an option avail-
able at extra cost which extends
the repair support to five years.
For More Information
www.hp.com/go/data_acq
HP E1432/33/34A
Product Overview
5965-9834E
H
For more information on Hewlett-Packard
test & measurement products, applications,
services, and for a current sales office listing,
visit our web site, http://www.hp.com/go/tmdir.
You can also contact one of the following
centers and ask for a test and measurement
representative.
United States:
Hewlett-Packard Company
Test and Measurement Call Center
P.O. Box 4026
Englewood, CA 90155-4026
1 800 452 4844
Canada:
Hewlett-Packard Canada Ltd.
5150 Spectrum Way
Mississauga, Ontario
L4W 5G1
Tel: (905) 206 4725
Europe:
Hewlett-Packard
European Marketing Centre
P.O. Box 999
1180 AZ Amstelveen
The Netherlands
Tel: (31-20) 547-9900
Japan:
Hewlett-Packard Japan Ltd.
Measurement Assistance Center
9-1, Takakura-Cho, Hachioji-Shi,
Tokyo 192, Japan
Tel: (81-426) 56-7832
Fax: (81-426) 56-7840
Latin America:
Hewlett-Packard
Latin American Region Headquarters
5200 Blue Lagoon Drive 9th Floor
Miami, Florida 33126 U.S.A.
Tel: (305) 267 4245/4220
Australia/New Zealand:
Hewlett-Packard Australia Ltd.
31-41 Joseph Street
Blackburn, Victoria 3130
Australia
Tel: 1 800 629 485
Asia Pacific:
Hewlett-Packard Asia Pacific Ltd
17-21/F Shell Tower, Times Square,
1 Matheson Street, Causeway Bay,
Hong Kong
Tel: (852) 2599-7777
Fax: (852) 2506 9285
Data is subject to change.
Copyright 1997, 1999 Hewlett-Packard Co.
Printed in USA 4/99
5965-7193E
12 of 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com