HP 2103R-CSDI - Manual (Page 50)

3-10 C H A P T E R 3: C O N F I G U R I N G T H E E D G E R O U T E R M O D U L E
Figure 3-1 Attaching a Terminal Cable to the Console Port
2 Attach the DB-25 end of the adapter cable to the RS-232 null modem cable
coming from your terminal. Figure 3-2 shows the terminal connections to
both the management module and the Edge Router console port.
Figure 3-2 Terminal Connections
• Configure module to network
• Report module status
• Configure LAN Access module
Configure the Edge Router engine
Assign Edge Router module to network and
report module status