Holux GM-120 - Manual (Page 72)

65
Setting the Beeper
You can set the beeper on for keypad, warning messages, or both.
To set the Beeper:
1. Press the Menu button twice to display the main
menu.
2. Select Sys. Settings and press OK.
3. Select the Set 3 tab using the left/right
navigation keys.
4. Use the navigation keys to highlight the Beeper
option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a setting.
7. Use the up/down navigation keys to highlight √ and press OK.
Setting the Startup Page
You can choose to display or hide the startup page when turning on
GM-120.
To enable/disable the startup page:
1. Press the Menu button twice to display the main
menu.
2. Select Sys. Settings and press OK.
3. Select the Set 3 tab using the left/right navigation
key.
4. Use the up/down navigation keys to highlight the
Startup Page option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select On/Off.
7. Use the up/down navigation keys to highlight √ and press OK.