Holux GM-120 - Manual (Page 35)

28
• Select Tracking Dist to calculate the tracking distance from
the start point to the end point.
• Select Tracking Area to calculate the tracking area from the
start point to the end point.
• Select Delete to delete the selected track log.
• Select Show ON to display the track log.
6. Under the Type tab, follow the steps below to
select the tracking method using distance or time
intervals:
• Highlight the Dist Interval field and press OK
to view the options. Use the navigation keys to
select the distance interval and press OK to
save your settings. Select the ----- option if
you do not wish to specify the distance interval.
• Highlight the Time Interval field and press OK view the options.
Use the navigation key to select the time interval and press OK
to save your settings. Select the ----- option if you do not wish
to specify the time interval.
7. Use the down navigation key to highlight the √ option and press OK
to save changes.
NOTE:
• If you select a value for both the distance interval and
time interval, a tracking point is recorded when either of
the interval value is reached.
• To ensure the integrity of data structure, the track log
cannot be saved into non-volatile memory when battery
is low.
• When saving track logs, select Continue option and
the track log setting will automatically be set to Show
ON. If you select Wrap or Fill, the track log setting will
automatically be set to Show Off.