HP 7600 - Manual (Page 46)

hp photosmart 7600 series
chapter 5
42
printing problems
Before contacting HP support, read this section for troubleshooting tips or go to
the online support services at www.hp.com/support.
Note: In the presence of high electromagnetic fields, printed documents
and photos may be slightly distorted.
The On/Attention light is
blinking amber.
An unrecoverable error has
occurred.
Turn off the printer. Unplug the
printer’s power cord, wait one
minute, then plug it in again.
Turn on the printer. If this does
not work, go to www.hp.com/
support or contact HP support.
Problem Possible cause Solution
Problem Possible cause Solution
The printer does not generate
borderless photo output.
You need to select the
appropriate paper size.
Select the paper size from
your printer’s control panel.
For more information, view the
HP Photosmart Printer Help
that you installed with your
printer software.
Printing is very slow.
(Continued on next page.) Your computer may have less
than the recommended system
requirements.
Check the amount of RAM
(system memory), the
processor speed, and the
amount of free hard disk
space on your computer.
Having less than 500 MB of
free space on your computer’s
hard disk can extend
processing time. For
information about system
requirements, view the HP
Photosmart Printer Help that
you installed with your printer
software.
Too many software programs
may be running at the same
time.
Close all unnecessary
software programs.
You may be using outdated
printer software.
Update the version of the
printer software you are using.
For more information, see the
HP Photosmart Printer Help.
For information about viewing
the printer help, see view the
hp photosmart printer help on
page 2.