HP 7600 - Manual (Page 24)

hp photosmart 7600 series
chapter 1
20
set LCD screen language and country/region
The first time you turn the printer on, you may be asked to select a language and
country/region for the printer’s LCD screen. You can change the language and
country/region setting at any time. The country/region setting also determines
what photo and paper sizes the printer’s LCD screen displays.
To change the language and country/region settings:
Note: Resetting preferences to the factory default settings does not change
your selected language or country/region setting. You can only change the
language by following these steps.
1 On the printer’s control panel, press the M
ENU
or button until S
ELECT
L
ANGUAGE
? appears on the printer’s LCD screen, and then press the OK
button.
2 Press the M
ENU
or button until your desired language appears.
Note: An asterisk next to a setting indicates the current selection.
3 Press the OK button to select the language. A message asking you to
confirm your selection appears. If it is the correct language, press the OK
button. If the incorrect language appears, press the C
ANCEL
button and
start the selection process again.
A message appears confirming your selection.
4 The S
ELECT
C
OUNTRY
/R
EGION
? setting appears on the printer’s LCD screen.
Press the OK button to continue.
5 Press the M
ENU
or button until the desired country and region
appears on the printer’s LCD screen.
6 Press the OK button to select the country and region.
The prompts and options on your printer’s LCD screen now appear in the
language you selected.
revert to the factory default settings
If you made adjustments to the default settings, you can reset the printer to the
original factory settings at any time.
Note: The language and region settings you selected do not change if you
revert back to the factory default settings.
To revert to the factory default settings:
1 On the printer’s control panel, press the M
ENU
or button until R
ESET
ALL MENU SETTINGS
? appears on the printer’s LCD screen.
2 Press the OK button.
A message appears confirming your selection.