HP 7600 User Manual

Page 23

basics guide

get started

select paper settings

Sensors in the printer’s In tray automatically detect the size and type of paper

loaded into the tray. To set the printer to ask you for the paper size and type each

time you print, turn the paper detection sensor off. The default setting is On.

Note: The printer does not automatically detect the paper type and size

when borderless printing is turned on. For information about setting the

borderless printing option, see print borderless photos on page 17.
Note: The Select paper settings option applies to print projects that you start

from the printer’s control panel. To use the printer’s automatic sensors when

you start print projects from your computer, select Automatic as the paper

type in the printer dialog.

To change the default setting for automatic paper detection:

On the printer’s control panel, press the M

ENU

or button until S

ELECT

APER

ETTINGS

? appears on the printer’s LCD screen, and then press the

OK button.
Note: An asterisk next to a setting indicates the current selection.

Select one of the following:
– Manually set–To turn automatic detection off, press the M

ENU

button until M

ANUALLY

SET

appears, and then press the OK button.

– Auto-detect–To turn automatic detection on, press the M

ENU

button until A

UTO

DETECT

appears, and then press the OK button.

A message appears confirming your selection.
Note: The new setting remains in effect until you change it again.

set print quality

You can set the print quality when you print photos, text, or graphics from the

control panel. Best is the default print quality and produces the best quality

prints. Normal quality conserves ink and prints faster.

Note: Changing the print quality setting applies only to the next print

project. Print quality is reset to Best when the print project finishes printing

or is cancelled.

To change the print quality for the next print job:

On the printer’s control panel, press the M

ENU

or button until

HANGE

RINT

UALITY

? appears on the printer’s LCD screen, and then

press the OK button.

Select one of the following:
– Best–For the highest quality photos by pressing the M

ENU

button until B

EST

appears, and then press the OK button.

– Normal–For normal quality photos by pressing the M

ENU

button until N

ORMAL

appears, and then press the OK button.

A message appears confirming your selection.