beautypg.com

HP 7600 User Manual

Page 26

background image

hp photosmart 7600 series

chapter 2

22

insert a memory card

After you have taken pictures with your digital camera, remove the memory card

from your camera and insert it into your printer. You can print photos immediately

or save the photos to your computer.
When the memory card is inserted correctly, the memory card light blinks and

then remains solid.

Caution! Do not pull out the memory card while the memory card light is

blinking. Removing a memory card while it is being accessed may damage

the printer or the memory card, or corrupt the information on the memory

card. For more information, see remove the memory card on page 25.

To insert a memory card:

1

Lift the input bay door.

2

Remove any memory cards that may already be inserted into any of the

memory card slots.

3

Hold the memory card so the correct side faces up. To determine the

correct orientation for your memory card, see the table that follows these

steps.
Note: To use a Sony Memory Stick Duo

memory card, insert the memory

card into the adapter that came with the Memory Stick Duo before you insert

it into the printer’s memory card slot.

4

Insert the memory card into the appropriate memory card slot. The end

with the metal contacts or pinholes must go into the printer first.
Caution! Inserting the memory card any other way may damage the

memory card or the printer.

5

Gently push the memory card into the printer until it stops. The memory

card may not insert all the way into the printer.
Caution! Forcing the memory card into the printer too far may damage the

memory card or the printer.
Note: If you insert a SmartMedia memory card upside down, the red On/

Attention light blinks. Remove the memory card and reinsert it properly.