HP 7600 - Manual (Page 17)

basics guide
get started
13
Note: For information about recycling print cartridges, go to
www.hp.com/recycle.
6 Take the new print cartridge out of its package.
7 Grasp the pink tab and gently peel off the plastic tape. Make sure you
remove only the plastic tape. Be sure to install the print cartridge
immediately after removing the tape; ink nozzles exposed longer than one
minute may dry out and cause printing problems later. Once the tape is
removed, do not attempt to replace it.
Caution! Do not touch the ink nozzles or the copper contacts on the print
cartridge. Touching these parts may cause the print cartridge to fail.
8 Insert the print cartridge:
a. Hold the print cartridge so the copper contacts go into the printer first.
Line up the ridges on the left and right sides of the top of the print
cartridge with the grooves on the inside of the print cartridge cradle.