HP 2400 - Manual (Page 9)

ix
get help
This Reference Guide contains information on using your HP PSC and provides
additional troubleshooting assistance for the installation process. The Reference
Guide also contains information on how to order supplies and accessories,
technical specifications, support, and warranty information.
The table below lists additional sources of information for your HP PSC.
help description
Setup Poster The Setup Poster provides instructions for setting up and configuring your
HP PSC. Make sure you use the correct poster for your operating system
(Windows or Macintosh).
Product Tour The tour provides a brief introduction to the HP PSC and its capabilities,
so you can start using it immediately. You can take the tour immediately
after installing the HP PSC software, or to take the tour at any time, see
the product specific online help.
HP Photo & Imaging
Help The HP Photo & Imaging Help provides detailed information on using the
software for your HP PSC.
For Windows users : Go to the HP Director , and click Help .
For Macintosh users : Go to the HP Director , and click Help , then click hp
photo & imaging help .
Troubleshooting help To access troubleshooting information, go to the HP Director , then click
Help . Open the Troubleshooting book in the HP Photo & Imaging Help,
then follow the links to general troubleshooting as well as links to
Troubleshooting help that is specific to your HP PSC. Troubleshooting is
also available from the
Help button that appears on some error messages
and in the Troubleshooting chapter of the Reference Guide.
Internet help and
technical support If you have Internet access, you can get help from the HP website at:
www.hp.com/support
The website also provides answers to frequently asked questions.
Readme file After you install your software, you can access the Readme file (if any)
from either the HP PSC CD-ROM or the HP PSC program folder. A
Readme file contains late-breaking information that does not appear in the
Reference Guide or the online help.
Dialog-box help
(Windows only) For Windows : Use one of the following ways to find information on a
specific feature:
• Right-click on the feature
• Select the feature and press F1
• Select the ? in the upper-right corner then click on the feature