HP 2400 - Manual (Page 50)

hp psc 2400 series
chapter 4
40
cop
y
10 Press to highlight the Photo enhancement setting, and then press OK .
11 Press Start Color .
The HP PSC makes a 4 by 6 inch (10 by 15 cm) borderless copy of your
original photo, as shown below.
make multiple copies of the same original
1 Load your original face down on the right front corner of the glass.
2 Press Copy .
The Number of Copies screen appears.
3 Press or use the keypad to enter the number of copies, up to the
maximum, and then press OK .
(The maximum number of copies varies by model.)
Tip: If you hold down either of the arrow buttons, the number of
copies changes by increments of 5 to make it easier to set a large
number of copies.
4 Press Start Black or Start Color .
In this example, the HP PSC makes six copies of the original 4 by 6 inch
(10 by 15 cm) photo.
You might find it easier to copy a photo by using the HP Director software that
you installed with your HP PSC. Using the HP Director, you can easily make
letter or 4 by 6 inch (10 by 15 cm) borderless copies of your photo, enlarge or
shrink the photo to fill the size of the paper you have loaded, and turn on Photo
enhancements to ensure you get the highest quality photos. For information on
using these features in the HP Director, see the onscreen
hp photo & imaging
help that came with your software.