Set fax options – HP 2400 User Manual
Page 77
reference guide
use the fax features
67
fa
x
3
Press
3
.
This selects Set New Defaults.
4
Press
OK
.
set fax options
There are numerous fax options that you can set, such as controlling whether the
HP PSC redials a busy number automatically. Review this section for information
on changing fax options.
This section contains the following topics:
•
redial a busy or unanswered number automatically
on page 67
•
use error correction mode (ECM)
on page 68
•
set automatic reduction for incoming faxes
on page 68
•
adjust the volume
on page 68
•
change the answer ring pattern (distinctive ringing)
on page 68
•
set the date and time
on page 69
•
set the paper size
on page 69
•
set tone or pulse dialing
on page 70
•
set backup fax reception
on page 70
redial a busy or unanswered number automatically
You can set your HP PSC to redial a busy or an unanswered number
automatically. The default setting for Busy Redial is Redial. The default setting
for No Answer Redial is No Redial.
1
Press
Setup
.
2
Do one of the following:
–
To change the
Busy Redial
setting, press
4
, and then press
3
.
This selects Advanced Fax Setup and then selects Busy Redial.
–
To change the
No Answer Redial
setting press
4
, and then press
4
again.
This selects Advanced Fax Setup and then selects No Answer Redial.
3
Press
to
select
Redial
or
No Redial
.
4
Press
OK
.
Advanced Fax Setup
1. Fax Reports Setup
2. Answer Ring Pattern
3. Busy Redial
4. No Answer Redial
5. Automatic Reduction
6. Backup Fax Reception
7. Error Correction Mode
Busy Redial
1. Redial
2. No Redial
No Answer Redial
1. No Redial
2. Redial